Prime Coat/Granular Sealing
A prime coat is a single application of either a specially formulated asphalt emulsion or a low-viscosity asphalt cutback. Their primary functions are to penetrate quickly into the granular surface and bind the material together, to partially waterproof the granular surface to prevent water erosion, to provide a temporary riding surface prior to overlay or seal coating and to provide a bond between the existing surface and the new wearing surface.
The asphalt emulsions used as prime coats typically contain a combination of asphalt and specially engineered agents to aid in penetrating the granular surface, while binding the aggregate particles to achieve stabilization.
The asphalt emulsions used as prime coats typically contain a combination of asphalt and special penetrating agents to aid in penetrating the granular surface, while binding the aggregate particles to achieve stabilization. Products such as Enviro-Prem or EDL can be used for this purpose.
The cutback asphalt used as a prime coat is a low viscosity asphalt containing a high quantity of solvent. The solvent allows the asphalt to penetrate into the granular and then evaporates out to leave the asphalt residue. RC 30 or Primer are used as prime coats.
In order to construct a proper well designed prime coat the following guidelines should be followed:
- Determine the type of prime coat to be used. Emulsion or cutback.
- Evaluate the road surface to be primed.
- Determine the dilution rate of the emulsion.
- Determine if scarification is needed.
- Calibrate and inspect all equipment.
- Follow proper construction techniques.
- More than one application of dilute emulsion may be needed.
- A sand blotter may be needed.
- Use traffic control to protect seal.
- Work only in weather suitable for type and grade of emulsion being used.